LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1989 >> G 10 Van V8-350 5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Service and Repair >> Dana/Spicer Full Floating Axle >> Axle Shaft Replace

Axle Shaft Replace

REAR AXLE SHAFT

Fig. 3 Axle, Hub & Drum Components.:






1. Using a soft faced mallet, tap axle shaft flange lightly to loosen shaft.
2. Remove axle shaft attaching bolts, Fig. 3, then grip axle shaft rib with pliers and twist to start shaft removal.
3. Remove axle shaft from axle tube.
4. Reverse procedure to install.
scientia non olet · About LEMON Manuals