With HR-6 Compressor

HR-6 Component View:

DA-6 Compressor Rear Head Details:

Remove or Disconnect

^ Be sure the compressor has no charge.
1. Pressure relief valve (32).
2. O-ring seal (33).

Install or Connect

^ Lubricate the threads of the pressure relief valve (32) and new seal with 525 viscosity refrigerant oil.
1. Pressure relief valve (32) with new seal.

Tighten
^ Pressure relief valve (32) to 9 N.m (84 in. lbs.).

Important
^ Leak test the compressor.