High-Side High-Pressure & High-Side Low-Pressure Cutoff Switch

Rear Head Details - V5 Compressor:

Compressor Components:

Remove or Disconnect

Tool Required:
J 5403 Internal Snap Ring Pliers

1. Retainers (45) from switches (3) and (4).
2. Switches (3) and (4).
3. O-ring seals (44) from the switch cavities.

Clean
^ Switch cavity and O-ring seal groove.

Install or Connect

Tools Required:
J 5403 Internal Snap Ring Pliers

1. O-ring seals (44) to the switch cavity.
^ Dip the O-ring seals into clean 525 refrigerant oil.
2. Switches (3) and (4).
3. Retainers (45).