LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1988 >> Chevy Van G30, 4.3 Z >> Labor Times >> Other Variant >> Drivelines and Axles >> Differentials and Drive Axles - Rear >> Pinion Shaft Seal >> Remove & Replace

Pinion Shaft Seal: Remove & Replace

WARNING: This page is about the Chevy Van G10, 4.3 Z, Automatic, 400/M40, which is a different variant/trim than selected.
Applies ToNoteStandard HoursWarranty HoursSkill Level
Full Floating Axle1.8B
Semi-Floating Axle1.2B
Combination Procedure: SPACER CRUSH SLEEVE: Replace:
Full Floating Axle1.6B
Semi-Floating Axle2.0B
scientia non olet · About LEMON Manuals