LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1987 >> Sprint Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2] >> Overhaul >> Piston & Rod Assembly >> Installation

Piston & Rod Assembly: Installation

  1. Apply engine oil to piston pin bores and connecting rod bushing. Position connecting rod with oil hole on left side of connecting rod. Using Piston Pin Remover/Installer (J-34838), position piston so arrow of piston faces up.
  2. Using an arbor press, insert piston pin until line marked on driver handle is flush with flat surface of piston.
scientia non olet · About LEMON Manuals