LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1987 >> Sprint Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2] >> Overhaul >> Connecting Rod Bearings >> Inspection

Connecting Rod Bearings: Inspection

  1. Inspect crankshaft journals for wear or damage. Measure journals for out-of-round and taper. If out-of-round or taper exceeds .0004" (.01 mm), replace or regrind crankshaft and select a proper oversize bearing.
  2. Inspect bearing shells for signs of pitting, burn or flaking and observe contact pattern. Bearings are available in standard and .010" (.25 mm) oversize.
scientia non olet · About LEMON Manuals