Piston/Pin/Ring Specifications
PISTONS, PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Piston Clearance | .0008-.0015 (.02-.04) | ||
| Pins | |||
| Piston Fit | Slip Fit | ||
| Rod Fit | Press Fit | ||
| Rings | |||
| Ring No. 1 | |||
| End Gap | .0079-0129 (.20-.33) | ||
| Side Clearance | .0012-.0027 (.03-.06) | ||
| Ring No. 2 | |||
| End Gap | .0079-.0137 (.20-.35) | ||
| Side Clearance | .0008-.0023 (.02-.06) | ||
| Ring No. 3 | |||
| End Gap | .0079-.0275 (.20-.70) | ||
| Side Clearance | N/A | ||