Wheel Bearings: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1987 GMC Safari, 1987 GMC S15 Pickup, 1987 GMC S15 Jimmy, 1987 GMC Cab & Chassis, and 1987 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
If bearing races were removed, drive inner bearing race into position using hammer, Driver Handle (J-8092 ) and Front Hub Bearing Race Installer (J-8850 ). Use hammer, driver handle and Front Hub Bearing Race Installer (J-8457 ), install inner bearing race. Lubricate each bearing assembly thoroughly. To complete installation, reverse removal procedure. Adjust wheel bearings.