Stabilizer Bar: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1987 GMC Safari, 1987 GMC S15 Pickup, 1987 GMC S15 Jimmy, 1987 GMC Cab & Chassis, and 1987 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Detach nut from link bolt. Remove bolt, retainers, rubber grommets and spacer. Repeat procedure for opposite side.
- Detach bracket-to-frame (or body) mounting bolts. Remove stabilizer shaft (with rubber insulator bushings) and brackets. Inspect insulator bushings and link bolt grommets for damage or deterioration and replace as necessary.