Axle Shaft Oil Seal: Remove & Replace
WARNING: This page is about the Monte Carlo Base, 4.3 Z, which is a different variant/trim than selected.
Includes: Repack Bearings (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both,w/C-Lock Axle | 1.3 | B | ||
| Both,w/o C-Lock Axle | 1.4 | 0.8 | B | |
| One Side,w/C-Lock Axle | 0.9 | B | ||
| One Side,w/o C-Lock Axle | 0.8 | 0.6 | B |