LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Valve Stem Oil Seals

Valve Stem Oil Seals

WARNING: This page is about a different car, the 1990 Suzuki Swift, 1990 Suzuki Sidekick, and 1990 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Place lubricated stem seal on valve guide. Use Valve Stem Seal Installer (09917-98210) to press seal on valve guide with hand pressure only. When installer bottoms on head, seal is positioned properly. Do not reuse old seals. Avoid twisting seals when installing.

scientia non olet · About LEMON Manuals