LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Valve Springs (1.3L DOHC)

Valve Springs (1.3L DOHC)

WARNING: This page is about a different car, the 1990 Suzuki Swift, 1990 Suzuki Sidekick, and 1990 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. See CYLINDER HEAD section. Remove camshaft. See CAMSHAFT & SPROCKETS section.
  2. Use Valve Spring Compressor (09916-14510) and Valve Spring Retainer Remover (09916-84510) to remove retainer locks. See Fig 1 . Remove retainers, springs, spring seats and valves. Keep all components in order for reassembly reference. Reverse removal procedure to complete installation.
Fig 1: Removing Valve Lock (DOHC Shown; SOHC is Similar)
G90H00346Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals