LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Cylinder Head (Samurai) >> Removal (Samurai)

Removal (Samurai)

WARNING: This page is about a different car, the 1990 Suzuki Swift, 1990 Suzuki Sidekick, and 1990 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL PRESSURE RELEASE  . Remove intake and exhaust manifolds. See INTAKE MANIFOLD  and EXHAUST MANIFOLD  .
  2. Remove timing belt. See TIMING BELT. Loosen cylinder head bolts in reverse order of tightening sequence. See Figure . Loosen head bolts in 2 or 3 steps to prevent cylinder head warpage. Remove bolts and cylinder head.
scientia non olet · About LEMON Manuals