LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Cylinder Head (Samurai) >> Installation

Cylinder Head (Samurai): Installation

WARNING: This page is about a different car, the 1990 Suzuki Swift, 1990 Suzuki Sidekick, and 1990 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

To install cylinder head, reverse removal procedure. Use new head and manifold gaskets. Tighten cylinder head in sequence, using 3 steps, to specifications. See Figure . See TORQUE SPECIFICATIONS  . Adjust timing belt.

scientia non olet · About LEMON Manuals