LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Overhaul >> Rear Main Bearing Oil Seal >> Removal

Rear Main Bearing Oil Seal: Removal

WARNING: This page is about a different car, the 1990 Suzuki Swift, 1990 Suzuki Sidekick, and 1990 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Remove transmission and flywheel. Remove oil seal housing. Remove seal. Inspect oil seal housing for wear or damage. Repair or replace as necessary. See Figure .