LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Sprint Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Cylinder Head (Except Samurai) >> Removal (Sidekick & Swift)

Removal (Sidekick & Swift)

WARNING: This page is about a different car, the 1989 Suzuki Swift, 1989 Suzuki Sidekick, and 1989 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve fuel pressure as previously described. Remove intake and exhaust manifolds as previously described.
  2. Discharge A/C system. Remove compressor suction hose from suction pipe (if equipped). Remove timing belt. See appropriate TIMING BELT section under REMOVAL & INSTALLATION  .
  3. Loosen cylinder head bolts in reverse order of tightening sequence. See Figure . Loosen head bolts in 2 or 3 steps to prevent cylinder head warpage. Remove bolts and cylinder head.
scientia non olet · About LEMON Manuals