Ignition Lock Cylinder: Remove & Replace
WARNING: This page is about the Monte Carlo Base, 3.8 9, 200-4R/MW9, which is a different variant/trim than selected.
DOES NOT include coding or cutting key.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Standard Column | 0.7 | 0.4 | B | |
| Tilt Column | 0.8 | 0.5 | B | |
| Combination Procedure: IGNITION LOCK CYLINDER: Recode: | ||||
| 0.3 | B | |||