Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Drum Brakes,Full Floating Axle		2.8		B
All,Drum Brakes,Semi Floating Axle		2.2		B
Front		1.0	0.9	B
Rear,Drum Brakes,Full Floating Axle		2.0	1.7	B
Rear,Drum Brakes,Semi Floating Axle		1.4	0.9	B
Additional Procedure: BRAKE SHOES &/OR PADS: Remove & Replace:
w/10 Stud Wheels add (Each)		0.1		B
w/Dual Rear Wheels add		0.2		B
Combination Procedure: AXLE SEAL: Replace: Semi-Floating Axle.
Rear,Both		0.8		B
Rear,One Side		0.6		B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional		0.2		B
One	Includes: Bleed Brakes.	0.3		B
Combination Procedure: CALIPER: Replace:
One	Includes: Bleed Brakes.	0.3		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
RWD, Front,Each	Includes: Repack Wheel Bearings.	0.4		B
Combination Procedure: DISC ROTOR: Replace:
RWD, Front,Non Separable,Each	Includes: Repack Wheel Bearings.	0.4		B
RWD, Front,Separable,Each	Includes: Repack Wheel Bearings.	0.5		B
Combination Procedure: DRUM: Replace:
Separable,Inboard Mounted,10 Bolt,Each		0.5		B
Separable,Inboard Mounted,exc 10 Bolt,Each		0.3		B
Separable,Outboard Mounted,Each		0.1		B
Combination Procedure: WHEEL BEARING: Repack: Both Sides.
RWD, Front		0.8		B
Combination Procedure: WHEEL BEARING: Replace:
RWD, Front,One Side	Includes: Repack Wheel Bearings.	0.5		B
Combination Procedure: WHEEL CYLINDER: Overhaul:
One,Off Vehicle	Includes: Bleed Brakes.	0.5		B
One,On Vehicle	Includes: Bleed Brakes.	0.3		B
Combination Procedure: WHEEL CYLINDER: Replace:
One	Includes: Bleed Brakes.	0.3		B