CADILLAC (Exc. ELDORADO) (1964-73): Camber

Loosen nut on spherical joint stud one turn and strike steering knuckle in area of spherical joint stud to free camber eccentric in steering knuckle. Use care to avoid hitting brake hose or joint seal. Using a suitable camber adjusting wrench (J-9231, J-23415), turn camber eccentric until desired camber is obtained.

NOTE: Left wheel on 1964-69 cars must have 1/4°-7/2° more positive camber than right wheel to compensate for crowned roads.

Final position of joint stud should be in rear portion of camber eccentric in order to keep steering angle correct. After adjustment, tighten lock nut to 60 ft. lbs.