6 Cylinder Models (1972)
CAUTION:
During adjustment, do not turn solenoid more than one complete turn without first disconnecting electrical wiring.
- Turn solenoid clockwise to increase RPM, counterclockwise to decrease RPM. Set to Solenoid Energized specification.
- Disconnect solenoid electrical wiring. Using suitable Allen wrench, turn screw located on end of solenoid to obtain Solenoid De-Energized RPM.
Solenoid RPM Specifications
| Application | Solenoid Energized | Solenoid De-Energized | |
|---|---|---|---|
| 250" | |||
| Auto. Trans. | 600 | 450 | |
| Man. Trans. | 700 | 450 | |