LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1968 >> Chevy II 2.5L Eng >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Removal >> OLDSMOBILE V8 Engines >> 1966-67 (Exc. TORONADO)

1966-67 (Exc. TORONADO)

  1. Remove hood, disconnect battery, disconnect all hoses, wires, and linkage from engine. Remove fan and pulley, coil, and upper radiator support.
  2. Raise car, drain radiator, disconnect exhaust pipes at manifold. Remove torque converter cover and install suitable converter holding tool
  3. Remove engine mount through bolts, raise engine and install suitable transmission support between transmission and frame.
  4. Remove three converter-to-flywheel bolts, six transmission-to-engine bolts, and lift engine from car.
    CAUTION: Do not damage vacuum modulator line.