LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1968 >> Chevy II 2.5L Eng >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake Systems - DELCO-Moraine Four Piston Disc >> Servicing >> Shoe & Lining Replacement >> Removal

Shoe & Lining Replacement: Removal

Siphon two-thirds of brake fluid from master cylinder.

NOTE: Do not empty master cylinder completely or disconnect hydraulic lines, or air will be drawn into system.

Raise vehicle and remove wheels. Remove and discard cotter pin from inboard end of shoe retaining pin and slide retaining pin out. Remove shoes by pulling up.

NOTE: If shoes are to be reused, mark for reassembly in original location.