LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1968 >> Camaro Base, 2D Convertible, 6.5L Eng, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> CHEVROLET V8 Engines (396, 400, 402, 427 & 454) >> Engine Oil Pump Assembly >> Installation

Engine Oil Pump Assembly: Installation

Apply sealer to end of pipe and tap in place. Install idler gear in pump body with smooth side of gear towards cover opening.

NOTE: Bottom of screen must be parallel with bottom of pan.
scientia non olet · About LEMON Manuals