LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT6 Sport >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. GM5207512Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Sill Garnish Molding (1) - Remove - Front Side Door Sill Garnish Molding Replacement

  2. GM4261403Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Insulator - Left Side (2) - Remove - Instrument Panel Insulator Replacement - Left Side 

  3. GM5237734Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Airbag - Driver Side (2) - Remove - Instrument Panel Lower Airbag Replacement - Driver Side

  4. GM4277130Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Plate Applique - Left Side (2) - Remove - Instrument Panel Trim Plate Applique Replacement - Left Side 

  5. GM4277296Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Center Trim Panel (2) - Remove - Instrument Panel Lower Center Trim Panel Replacement 

  6. GM5162610Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (1) - Remove - Front Floor Console Extension Panel Replacement - Left Side 

  7. GM4279822Courtesy of GENERAL MOTORS COMPANY

    Place the hood primary latch release cable release cable handle (1) into the open position, release the center handle retaining feature. While pulling downwards and forward slide the handle off of the instrument panel knee bolster.

  8. Disconnect the data link connector. (2)
  9. Instrument Panel Knee Bolster Bolt (3) - Remove [ 3x ]
  10. GM4279823Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bolt (1) - Remove [ 2x ]

  11. GM4279824Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bolt (1) - Remove [ 3x ]

  12. GM4279825Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  13. Instrument Panel Knee Bolster (1) - Remove
  14. Disconnect all electrical connectors.
  15. Transfer components as necessary.
scientia non olet · About LEMON Manuals