LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 898 (Transfer Case - Mp 3023/3024 (NQH) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> High/Low Shift Fork Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive the transfer case high/low shift fork pin (1) out using a drift punch and hammer.
  2. Remove the transfer case high/low shift fork (2). Inspect for wear or damage in the spring seat locations. The component must be replaced if damage is found.
  3. Remove the transfer case high/low shift fork spring assembly (3) from the transfer case high/low shift fork (2). Inspect for a broken spring. Replace the component if this conditions exist.
scientia non olet · About LEMON Manuals