X380 Inside Rearview Mirror Wiring Harness to Dome Lamp Wiring Harness (9L7+UVO)

WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY	Courtesy of GENERAL MOTORS COMPANY
Connector Part Information Harness Type: Inside Rearview Mirror Wiring Harness OEM Connector: 35061724 Service Connector: Service by Harness - See Part Catalog Description: 10-Way F 1.5, 2.8 Kaizen Series (L-GY)	Connector Part Information Harness Type: Dome Lamp Wiring Harness OEM Connector: 13506926 Service Connector: Service by Harness - See Part Catalog Description: 10-Way M 1.5, 2.8 Kaizen Series (L-GY)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool
I	Not required	J-35616-2A (GY)	No Tool Required
II	Not required	J-35616-4A (PU)	No Tool Required
III	Not required	J-35616-3 (GY)	No Tool Required
IV	Not required	J-35616-5 (PU)	No Tool Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	2.5	GN/BU	5989	II	-	Emergency Vehicle Lamp Relay Control	1	2.5	GN/BU	5989	IV	-
2	0.35	VT/WH	5065	I	-	Stop Lamp Relay Coil Control	2	0.5	VT/WH	5065	III	-
3	0.35	BK	1050	I	-	Ground	3	0.35	BK	1050	III	-
4	0.35	WH/VT	1430	I	-	Exterior Courtesy Lamp Control	4	0.35	WH/VT	1430	III	-
5	2.5	BK	1050	II	-	Ground	5	2.5	BK	1050	IV	-
6	0.35	VT/GN	1739	II	-	Run/Crank Ignition 1 Voltage	6	0.35	VT/GN	1739	IV	-
7	0.35	WH/BU	6973	I	-	Rearview Camera Signal [-]	7	0.35	WH/BU	6973	III	-
8	0.35	GY/YE	6972	I	-	Rearview Camera Signal [+]	8	0.35	GY/YE	6972	III	-
9	0.35	BARE	6974	I	-	Rearview Camera Low Reference	9	0.35	BARE	6974	III	-
10	0.35	BK/WH	1851	II	-	Signal Ground	10	0.35	BK/WH	1851	IV	-