LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Automatic Transmission - 10L1000 (MGM MGU) - Diagnostic Information And Procedures (1 Of 2)) >> Diagnostic Information and Procedures >> DTC P0968, P0970, or P0971 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Electronic Component Description

Circuit Description
Control - Terminal 9 The output circuit is switched to 12 V to enable the component(s).
Control - Terminal 16 The output circuit is switched to ground to activate the component.
Component Description
K71 Transmission Control Module The control module contains a microprocessor used to process input data to control outputs.The control module contains a microprocessor used to process input data to control outputs.The control module receives information from a variety of sensors, switches and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio and torque converter clutch operation.
Q77C Transmission Control Solenoid Valve 3 A linear solenoid actuator is an electro-mechanical device that converts electrical power into a mechanical pushing or pulling force or motion.
  • The solenoid actuator varies the force depending on the current applied to the solenoid coil.
  • The solenoid actuator applies minimum force with minimum current applied to the solenoid coil.
  • The solenoid actuator applies maximum force with maximum current applied to the solenoid coil.