Circuit/System Verification
WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On/Vehicle - In Service Mode
- Perform the scan tool control function: Transfer Case Neutral Range Indicator - On/Off
Verify the component turns On and Off: S126 Drive Mode Select Switch - Transfer Case Neutral Range Indicator
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- Refer to: Testing for Intermittent Conditions and Poor Connections