LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Transfer Case - Mp 3023/3024 (NQH) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Transfer Case Grating Noise

Transfer Case Grating Noise

WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Cause Correction
DEFINITION: A faulty internal transfer case component that causes a grating noise in the transfer case while in the AWD, 4HI, or 4LO mode.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Broken clutch apply plate
  1. Inspect for a broken clutch apply plate. Transfer Case Disassemble (with MYD) , or Transfer Case Disassemble (with MGM, MGU) , and Transfer Case Assemble (with MYD) , or Transfer Case Assemble (with MGM, MGU)
  2. Replace the apply plate and the transfer case components that are damaged from debris. Transfer Case Disassemble (with MYD) , or Transfer Case Disassemble (with MGM, MGU) , and Transfer Case Assemble (with MYD) , or Transfer Case Assemble (with MGM, MGU)
Faulty control actuator lever thrust bearings
  1. Inspect for faulty control actuator lever thrust bearings. Two/Four Wheel Drive Shift Components Cleaning and Inspection
  2. Recondition the transfer case components that are damaged from debris. Transfer Case Disassemble (with MYD) , or Transfer Case Disassemble (with MGM, MGU) , and Transfer Case Assemble (with MYD) , or Transfer Case Assemble (with MGM, MGU)