Manual Shift Shaft Seal Installation
WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Manual Shift Shaft Seal
CAUTION:
When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.
NOTE:
Install a NEW seal. Do NOT reuse the old seal. Special Tool DT-49101 Seal Installer Equivalent regional tools: Special Tools . |