1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing Installation
WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | 1 - Reverse and 1 - 2 - 3 - 4 - 5 - 6 Clutch Piston Housing Procedure Make sure lube holes line up properly.
NOTE:
Before Installing 1 - Reverse and 1 - 2 - 3 - 4 - 5 - 6 Clutch Piston Housing, check for proper operation. The 1 - Reverse Backing Plate should spin freely in one direction and lock in the other direction. A slight ratcheting noise may be heard when spinning in the free direction. |