1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (1 of 2) Disassemble
WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (1 of 2) Disassemble
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-6 Clutch Backing Plate Retaining Ring |
| 2 | 1-2-3-4-5-6 Clutch Backing Plate |
| 3 | 1-2-3-4-5-6 Clutch Plate - Friction [2x] |
| 4 | 1-2-3-4-5-6 Clutch Plate [2x] |
| 5 | 1-2-3-4-5-6 Clutch Plate - Wave
NOTE:
The 1 - Reverse Clutch Retaining Ring should not be removed from bottom. There are no serviceable parts. |