LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 557 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Replacement (Front Wheel Drive) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  2. Prior to removing the mount, mark the mount fasteners to mount and mount to sub frame interfaces using spray paint or a marker for correct positioning during installation.
  3. Using a suitable jack stand, support the rear of the powertrain.
    GM4290059Courtesy of GENERAL MOTORS COMPANY
  4. Remove the transmission mount to bracket through bolt (1).
  5. Lower the rear of the drivetrain and front suspension cradle enough the remove the rear mount bolts. Drivetrain and Front Suspension Cradle Removal and Installation
    NOTE:

    The nuts are reusable.

  6. Remove and DISCARD the rear mount to drivetrain and front suspension cradle bolts (2).
  7. Remove the transmission rear mount
scientia non olet · About LEMON Manuals