LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 557 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Replacement (Front Wheel Drive) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the outline made by the spray paint or marker, position the transmission mount to the drivetrain and front suspension cradle.
    GM4290059Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

  2. Install the NEW transmission rear mount bolts (2) and nuts and tighten the bolts to 100 N.m (74 lb ft) plus 60 to 75 degrees.
  3. Install the drivetrain and front suspension cradle to it's original position. Drivetrain and Front Suspension Cradle Removal and Installation
  4. Install the transmission mount to bracket through bolt (1) and tighten to 100 N.m (74 lb ft).
  5. Remove the jack stand.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals