Installation Procedure
WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission Mount (2) - Install
- Hand start the transmission mount bolts (1).CAUTION:
Refer to Fastener Caution .
CAUTION:The stated fastener removal or installation sequence must be followed to avoid damage to the components of the mount assembly.
- Tighten in the sequence shown. 100 N.m (74 lb ft)
- Transmission Mount Bolt (1) - Install and tighten [2x] 58 N.m (43 lb ft)
- Transmission Mount Brace (2) - Install
- Transmission Mount Brace Bolt (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- Remove the transmission jack.
- Battery Tray - Install - Battery Tray Replacement