LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 557 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (Front) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
GM4675709Courtesy of GENERAL MOTORS COMPANY
  1. Install the transmission mount (4).
    CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission mount bolts (1, 2, 3) and tighten to 58 N.m (43 lb ft).
    GM4675691Courtesy of GENERAL MOTORS COMPANY
  3. Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).
  4. Connect the electrical harness retainer to the mount, if equipped.
  5. Remove the jack from the transmission.
  6. Lower the vehicle. Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals