Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Install the transmission mount (4).
- Install the transmission mount bolts (1, 2, 3) and tighten to 58 N.m (43 lb ft).
Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).
- Connect the electrical harness retainer to the mount, if equipped.
- Remove the jack from the transmission.
- Lower the vehicle. Lifting and Jacking the Vehicle
CAUTION:
Refer to Fastener Caution .