Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Transmission Range Selector Manual Park Release Cable Bracket (1) - Install
- Electronic Transmission Range Selector Manual Parking Release Cable Bracket Bolt (2) - Install and tighten [2x] 22 N.m (16 lb ft)
- WARNING:
After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury.
Electronic Transmission Range Selector Manual Park Release Cable (3) @ Transmission - Install - Electronic Transmission Range Selector Manual Park Release Cable Replacement
- Battery Tray - Install - Battery Tray Replacement
- Release the parking brake.
CAUTION:
Refer to Fastener Caution .