Circuit/System Verification

Verify that the brake fluid has the proper level. The fluid level should be above minimum level.
- If low
  Refer to Brake Fluid Loss (without JEO) , or Brake Fluid Loss (with JEO) .
- Go to next step: If above minimum level
Ignition ON/Vehicle in Service Mode.
Verify the brake warning indicator turns ON and OFF, when commanding the instrument cluster All Indicators ON and OFF with a scan tool.
- If the brake warning indicator does not turn ON and OFF
  Replace the P16 Instrument Cluster.
- Go to next step: If the brake warning indicator turns ON and OFF
Refer to Circuit/System Testing.