Circuit/System Description
For an overview of the component/system, refer to Hydraulic Brake System Description and Operation (without JEO) , or Hydraulic Brake System Description and Operation (with JEO)
| Circuit |
Description |
| Signal |
The control module input circuit has an internal resistance connected to 12 V. |
| Ground |
Chassis Ground |
| Component |
Description |
| B20 Brake Fluid Level Switch |
The brake fluid level switch is a normally open switch that closes when the brake fluid is below the minimum level. The switch is magnetically actuated by a float. |
| K160 Brake System Control Module |
The control module K160 can increase and decrease the brake pressure on all 4 wheels individually in order to fulfill these functions:
- Antilock Braking
- Traction Control
- Vehicle Stability Control
|