Front Fender Upper Rear Molding Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open the front side door.
1	Front Fender Upper Rear Molding Retainer [3x]
2	Front Fender Upper Rear Molding Procedure Apply a suitable tape around the front fender upper rear molding. Using a suitable trim-type release tool, carefully release the front fender upper rear molding retainers. Replace retainers if necessary.

Callout

Component Name

Preliminary Procedure
Open the front side door.

Front Fender Upper Rear Molding Retainer [3x]

Front Fender Upper Rear Molding

Procedure

Apply a suitable tape around the front fender upper rear molding.
Using a suitable trim-type release tool, carefully release the front fender upper rear molding retainers.
Replace retainers if necessary.