LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. GM4295198

    Body Hinge Pillar Garnish Molding - Left Side (1) - Remove Body Hinge Pillar Garnish Molding Replacement

  2. GM4261403

    Instrument Panel Insulator (2) - Remove - Instrument Panel Insulator Replacement - Left Side 

  3. GM4297404

    Instrument Panel Lower Airbag - Driver Side (2) - Remove - Instrument Panel Lower Airbag Replacement - Driver Side

  4. GM4277130

    Instrument Panel Trim Plate Applique - Left Side (2) - Remove - Instrument Panel Trim Plate Applique Replacement - Left Side 

  5. GM4291288

    Front Floor Console (1) - Remove - Front Floor Console Replacement 

  6. GM4279822

    Place the hood primary latch release cable release cable handle (1) into the open position, release the center handle retaining feature. While pulling downwards and forward slide the handle off of the instrument panel knee bolster.

  7. Disconnect the data link connector. (2)
  8. Instrument Panel Knee Bolster Bolt (3) - Remove [ 3x ]
  9. GM4279823

    Instrument Panel Knee Bolster Bolt (1) - Remove [ 2x ]

  10. GM4279824

    Instrument Panel Knee Bolster Bolt (1) - Remove [ 3x ]

  11. GM4279825

    Use a plastic trim tool if necessary.

  12. Instrument Panel Knee Bolster (1) - Remove
  13. Disconnect all electrical connectors.
  14. Transfer components as necessary.
scientia non olet · About LEMON Manuals