Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Master Cylinder Reservoir Grommet |
| Brake Pedal Retainer |
| Front Brake Hose Washer |
| Rear Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt @ Front Brake Caliper | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt @ Front Suspension Strut | 9 N.m (80 lb in) |
| Brake Master Cylinder Nut | 25 N.m (18 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 8 N.m (71 lb in) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Electronic Brake Control Module Bolt | 3 N.m (27 lb in) |