Installation Procedure

Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Install the tabs into the instrument panel lower trim panel insulator (1).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator Retainer (1) - Install
Instrument Panel Insulator Bolt (2) - Install and tighten [ 2x ] 2.5 N.m (22 lb in)
Instrument Panel Insulator Nut (3) - Install and tighten [ 2x ] 6 N.m (53 lb in)
Courtesy of GENERAL MOTORS COMPANY

Install the hood primary latch release cable handle (1). Hood Primary Latch Release Cable Replacement