Instrument Panel Center Trim Pad Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Instrument Panel Cluster Trim Plate Applique Replacement Instrument Panel Instrument Cluster Hood Replacement
1	Instrument Panel Center Trim Pad Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Center Trim Pad Procedure Using a flat-bladed plastic trim tool, release the retaining clips.

Callout

Component Name

Preliminary Procedures

Instrument Panel Center Trim Pad Bolt

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Center Trim Pad
Procedure
Using a flat-bladed plastic trim tool, release the retaining clips.