Instrument Cluster Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Trim Pad Replacement
1	Instrument Cluster Bolt [ 4x ] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Cluster Procedure Disconnect the electrical connector. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Instrument Cluster Bolt [ 4x ]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Cluster

Procedure

Disconnect the electrical connector.
Perform the necessary programming and setup procedure: Control Module References