Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Front Wheel Drive Intermediate Shaft Retaining Ring |
| Front Wheel Drive Intermediate Shaft Seal |
| Rear Wheel Drive Shaft Washer |
| Retaining Ring |
| Wheel Drive Shaft Flange Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Wheel Drive Shaft Nut | |
|
150 M.m (111 lb-ft) |
|
loosen 45 degrees |
|
270 M.m (199 lb-ft) |
| Rear Wheel Drive Shaft Universal Joint Retainer | |
|
50 M.m (37 lb-ft) |
|
40 - 50 degrees |
| Rear Wheel Drive Shaft Nut | |
|
150 M.m (111 lb-ft) |
|
loosen 45 degrees |
|
270 M.m (199 lb-ft) |