LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT5 V, 4WD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Front Seat Back Frame Replacement

Front Seat Back Frame Replacement

GM4205982Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Front Seat Back Cover and Pad Replacement 
1 Driver or Passenger Seat Back Frame Bolt [ 4x ]
CAUTION:

Refer to Fastener Caution .

NOTE:

Refer to the procedure link for torque specification.

Procedure

  1. Remove the seat back frame bolts.
  2. If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
    1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
    2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Apply thread locking adhesive to the external threads of the component. Adhesives, Fluids, Lubricants, and Sealers 
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.

Tighten 
45 N.m (33 lb ft)
2 Driver or Passenger Seat Back Cushion Frame

Procedure

  1. Disconnect and reposition harness as necessary.
  2. Transfer components as necessary.
scientia non olet · About LEMON Manuals