Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
The fuel tank filler pipe housing and fuel tank filler pipe must be loose to rotate housing to install on vehicle.

Rotate the fuel tank filler pipe housing (1) and the fuel tank filler pipe to the body side outer panel.
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Press the fuel tank filler pipe housing (1) on the body side outer panel until fully seated.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Fuel Tank Filler Pipe Ground Bolt (1) - Install - Fuel Tank Filler Pipe Replacement
Courtesy of GENERAL MOTORS COMPANY

Fuel Tank Filler Pipe Ground Bolt (1) - Install - Fuel Tank Filler Pipe Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
When replacing the fuel tank filler housing or filler door with a new housing or door, a new label is required to be added to the new fuel filler housing or door.

Fuel Tank Filler Door (1) - Install - Fuel Tank Filler Door Replacement
Courtesy of GENERAL MOTORS COMPANY

Rear Wheelhouse Liner (2) - Install - Rear Wheelhouse Liner Replacement
Courtesy of GENERAL MOTORS COMPANY

Rear Tire Front Air Deflector (2) - Install
Lower the vehicle.