Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, position the instrument carrier in the vehicle. (1)
Connect the fasteners securing the instrument panel wiring harness to the instrument carrier.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Panel Carrier Bolt (1) - Install and tighten [ 5x ] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Carrier Bolt (1) - Install and tighten [ 10x ] 2.5 N.m (22 lb in)
Front Compartment Fuse Block Bolt (2) - Install and tighten 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel - Right Side (1) - Install - Instrument Panel Upper Trim Panel Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Cluster Trim Plate (2) - Install - Instrument Panel Cluster Trim Plate Replacement
Courtesy of GENERAL MOTORS COMPANY

Head-Up Display (1) - Install - Head-Up Display Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Cluster (2) - Install - Instrument Cluster Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Air Duct- Outer (1) - Install - Instrument Panel Compartment Air Duct Replacement - Outer (K4C)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Air Outlet Duct - Right Side (2) - Install - Instrument Panel Outer Air Outlet Duct Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Floor Front Air Outlet Duct - Left Side Outer (2) - Install - Floor Front Air Outlet Duct Replacement - Left Side Outer
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Air Outlet Duct - Left Side (2) - Install - Instrument Panel Outer Air Outlet Duct Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Install - Front Floor Console Removal and Installation